Full Carbon Enduro Full Suspension MTB Bike ICANIAN-P9

0.0
0.0 out of 5 stars (based on 0 reviews)

The ICANIAN P9 is a carbon enduro full-suspension mountain bike built on the ethos: “Climb light, descend hard | Carbon made reachable.” Its Toray T700/T800 carbon frame balances low weight and durability, paired with 150 mm of rear travel and 160 mm up front for confident off-road handling. An AM29040 carbon wheelset with DT350 hubs and MAXXIS tires delivers grip, precision, and stability, while a wide-ratio cassette and an ergonomic cockpit keep gearing flexible and control intuitive across climbs, chutes, and park laps.

$3,329.00

Full Carbon Enduro Full Suspension MTB Bike ICANIAN – P9

Carbon Frame for Strength & Agility

Built from Toray T700/T800 carbon fiber, the P9 frame weighs approximately 2,400 ± 20 g, delivering a rare blend of strength and agility. Available in sizes S–L, it pairs a RockShox Deluxe shock (210 × 55 mm) providing 150 mm of rear travel with a 160 mm-travel 29er Enduro Rainbow fork. Boost 12 × 148 mm rear spacing increases lateral stiffness and tracking, ensuring precise handling on rocky or uneven trails.

Carbon Wheels for Trail Performance

The AM29040 carbon wheelset is tuned for enduro, featuring a 34 mm inner width and 40 mm outer width to support tires such as the MAXXIS Minion DHR II (29 × 2.3, 35 psi). Paired with DT350 hubs and Sapim Basic Leader spokes, it weighs 955 ± 15 g (front) and 1,060 ± 15 g (rear). This setup delivers dependable grip and stability for loose corners and fast descents.

Full Carbon Enduro Full Suspension MTB Bike ICANIAN – P9
Full Carbon Enduro Full Suspension MTB Bike ICANIAN – P9

Engineered for control

The P9 pairs a full-carbon HB15 handlebar (35 × 800 mm) with an ST35-50 stem for a comfortable, precise cockpit. A PG-1230 Eagle 11–50T cassette delivers a truly wide gear range for everything from punchy climbs to high-speed transfers, while the U-CLAMP braking system provides consistent, confidence-inspiring stopping power. Together, these components translate rider input into steady, predictable handling on the most technical enduro trails.

Full Carbon Enduro Full Suspension MTB Bike ICANIAN – P9

Carbon Frame for Strength & Agility

Built from Toray T700/T800 carbon fiber, the P9 frame weighs approximately 2,400 ± 20 g, delivering a rare blend of strength and agility. Available in sizes S–L, it pairs a RockShox Deluxe shock (210 × 55 mm) providing 150 mm of rear travel with a 160 mm-travel 29er Enduro Rainbow fork. Boost 12 × 148 mm rear spacing increases lateral stiffness and tracking, ensuring precise handling on rocky or uneven trails.

Full Carbon Enduro Full Suspension MTB Bike ICANIAN – P9

Carbon Wheels for Trail Performance

The AM29040 carbon wheelset is tuned for enduro, featuring a 34 mm inner width and 40 mm outer width to support tires such as the MAXXIS Minion DHR II (29 × 2.3, 35 psi). Paired with DT350 hubs and Sapim Basic Leader spokes, it weighs 955 ± 15 g (front) and 1,060 ± 15 g (rear). This setup delivers dependable grip and stability for loose corners and fast descents.

Full Carbon Enduro Full Suspension MTB Bike ICANIAN – P9

Engineered for control

The P9 pairs a full-carbon HB15 handlebar (35 × 800 mm) with an ST35-50 stem for a comfortable, precise cockpit. A PG-1230 Eagle 11–50T cassette delivers a truly wide gear range for everything from punchy climbs to high-speed transfers, while the U-CLAMP braking system provides consistent, confidence-inspiring stopping power. Together, these components translate rider input into steady, predictable handling on the most technical enduro trails.

A purpose-built carbon frameset and wheelset for aggressive enduro and high-intensity trail riding. The ICANIAN P9 prioritizes lightweight efficiency, durability, and precise handling—pairing a compliant, high-grip front end with a laterally stiff rear triangle for drive stability.

Build Philosophy & Performance

Cohesive chassis–wheelset system optimized for strength-to-weight and predictable, high-speed handling on demanding enduro courses.

34 mm internal-width carbon rims support modern tire casings for a stable contact patch, cornering grip, and braking confidence.

DT350 hubs balance long-term reliability with responsive engagement for technical lines and frequent line corrections.

32 mm rim depth and overall architecture complement the frame geometry for both sprint segments and sustained climbs.

Frameset

Material: Toray T700 & T800 full carbon
Rear Travel: 150 mm
Shock: RockShox Deluxe, 210 × 55 mm
Mounting Hardware: 22.2 × 8 mm (each end)
Frame Weight: 2,400 ± 20 g
Drivetrain & Suspension
Fork: 29er enduro, Rainbow finish, 160 mm travel, 15 × 110 mm Boost axle, black
Rear Axle / Dropouts: 12 × 148 mm Boost
Brake System: U-CLAMP lever clamps with black hardware (L/R)

Wheelset

Rims: AM29040 full-carbon, hookless
Depth / Width: 32 mm depth; 34 mm internal / 40 mm external
Spokes: Sapim Basic Leader (round)
Hubs: DT Swiss 350
Weight: Front 955 ± 15 g; Rear 1,060 ± 15 g
Tires (example setup): MAXXIS Minion DHR II, 29 × 2.3, ~35 psi
Recommended Tire Size: 29 × 2.3″ or 27.5 × 2.8″

Compatibility

Tire Support: Wide internal width supports modern 2.3″ front tires and up to 2.8″ for 27.5″ builds, enhancing grip and float across varied terrain.
Axle Standards: Boost-compatible (12 × 148 mm) to align with contemporary suspension and drivetrain components.

Frameset ICANIAN P9 Frame
Material 100% Carbon Fiber Toray T700 & T800
Size S /M /L
Shock Size Rockshox Delux, 210*55mm, eye to eye 22.2*8mm
Travel 150mm
Frame weight 2400±20G(XS)
Cassette CS PG1230 EAGLE 11-50T
Fork 29er Enduro Bike Rainbow, travel 160mm, black, 15*110mm axle
Dropout 12*148mm
Max Tire Size 27.5*2.8″ or 29*2.3″
Alex 12*148mm Boost
Brake-Disc-Lever clamp U-CLAMP BLK BOLT LEFT/RIGHT
Handlebar Full carbon handlebar HB15(35X800)
Stem ST35-35X50
WHEELSET Carbon AM29040, Hookless, 29er Enduro MTB Wheels
Tires MAXXIS MINION DHR II 29X2.3, 35psi
Hubs DT Swiss DT350
Rims Full Carbon Wheelrims Am29040, 32/32H
Depth 32mm
Inner Width 34mm
Outer Width 40mm
Spokes Sapim Basic Leader Round
Wheelset weight Front 955±15g, Rear 1060g±15g
Recommend Tire 29er*2.3’’

Warranty Policy

Every ICAN frame and rim has a useful product life cycle. Each bike, frame and rim will have a unique identification number and warranty card. Complete the provided card and warranty form, and send them to us. Failure to use the provided warranty card will void your warranty. Save your dated receipt for proof of purchase.

Product Group:

Frame and Rim

Applies to all ICANIAN.

Coverage:

2-year warranty from the date of purchase.

Conditions:

  1. If any manufacturing defect occurs within 30 days of the date of purchase, is obligated to replace the rim(s) and also pay for the shipping cost. If any manufacturing defect occurs after 31 days and up to 2 years, ICANIAN is obligated to replace the product(s). The product owner is responsible for shipping costs.
  2. If we no longer make the rim you purchased we’ll upgrade you to the newest equivalent model at no extra cost.
  3. The Warranty program is not transferable and only applies to the initial purchaser.

This warranty does not cover:

  • Normal wear and tear (bearings, spokes, nipples, brake tracks, tires, inner tubes, pawls, freehub, seals, rim tape etc.)
  • Products which have been incorrectly installed and/or adjusted.
  • Issues brought about by neglect or poor maintenance.
  • Surface finish and cosmetic treatments (anodizing, decals, etc.)
  • Crash damage.
  • Consequential or incidental damages (where applicable)
  • Products purchased “second-hand”, “used”, “as-is”, or expressly “without warranty”
  • Counterfeit products
  • Unauthorized modification or alteration, including without limitation, any repair performed by anyone other than ICANIAN or an ICANIAN-authorized servicer, or outside of the recommendations of ICANIAN Customer Service

Tips:Please contact the official support of ICANIAN at the first time when you find a quality problem. Please do not repair our products privately, otherwise we will not bear any warranty.

The following will void your warranty

  • Misuse (trick riding, etc.)
  • Modification of wheels
  • Tire pressure exceeding 50psi
  • Improper assembly
  • Installation of parts or accessories not originally intended for, or not compatible with the wheelsets sold.
  • Use of brake pads not designed for carbon wheels
0.0
0.0 out of 5 stars (based on 0 reviews)
Excellent0%
Very good0%
Average0%
Poor0%
Terrible0%

Related products