29er Carbon DH Wheelset Wide Flat Bead – DH40
Purpose-built for Downhill (DH) abuse. The new rim uses a widened, flat-top hookless bead that increases tire–rim contact under square-edge hits and hard landings, spreading impact loads and reducing stress concentrations to markedly improve pinch-cut and bead damage resistance. Paired with DT Swiss 350 EDG Limited Edition hubs, it delivers reliable engagement and easy service for all-day park laps and race stages.
$998.68
Wide, flat bead load path → larger contact area for better impact diffusion and pinch protection; holds up when things get rough.
DH-specific layup with targeted reinforcements at the bead and spoke bed for repeated drops and high-frequency impacts.
31 mm inner width supports 2.4–2.6″ DH tires, staying composed at lower pressures.
25 mm depth balances lateral support with vertical compliance to filter chatter and reduce arm fatigue.
DT350 EDG: classic Ratchet mechanism—reliable, strong, and easily serviceable—with a limited-edition finish.
Tubeless-friendly interior: rounded edges and a smooth tire bed make setup quick and long-term sealing stable.
DH racers and bike-park riders seeking maximum impact strength and consistent cornering support.
Enduro riders who want a DH-rated front-line rim for lift-served days or brutal stages.
Riders who prefer lower pressures for grip but won’t accept rim failures.
Hubs & Build
Hubs: DT Swiss 350 EDG Limited Edition
- Freehub:HG / XD / Micro Spline (choose one)
- Rotor interface:6-bolt or Center Lock (select at order)
Drilling & lacing: 32H front and rear recommended, 3× pattern
Complete wheelset weight varies with freehub, spoke model, and nipple material. A weighed quote can be provided for your exact spec.
Ride Performance
Impact resilience: Wide flat bead + reinforced layup shrug off square-edge hits and harsh landings.
Cornering support: 31 mm IW stabilizes sidewalls for precise tracking on off-camber, rock, and root.
High-speed stability: 25 mm depth yields controlled compliance—filters buzz without going vague.
Easy upkeep: DT350 Ratchet internals are simple to clean and re-grease mid-season.
Wide, flat bead load path → larger contact area for better impact diffusion and pinch protection; holds up when things get rough.
DH-specific layup with targeted reinforcements at the bead and spoke bed for repeated drops and high-frequency impacts.
31 mm inner width supports 2.4–2.6″ DH tires, staying composed at lower pressures.
25 mm depth balances lateral support with vertical compliance to filter chatter and reduce arm fatigue.
DT350 EDG: classic Ratchet mechanism—reliable, strong, and easily serviceable—with a limited-edition finish.
Tubeless-friendly interior: rounded edges and a smooth tire bed make setup quick and long-term sealing stable.
DH racers and bike-park riders seeking maximum impact strength and consistent cornering support.
Enduro riders who want a DH-rated front-line rim for lift-served days or brutal stages.
Riders who prefer lower pressures for grip but won’t accept rim failures.
Hubs & Build
Hubs: DT Swiss 350 EDG Limited Edition
- Freehub:HG / XD / Micro Spline (choose one)
- Rotor interface:6-bolt or Center Lock (select at order)
Drilling & lacing: 32H front and rear recommended, 3× pattern
Complete wheelset weight varies with freehub, spoke model, and nipple material. A weighed quote can be provided for your exact spec.
Ride Performance
Impact resilience: Wide flat bead + reinforced layup shrug off square-edge hits and harsh landings.
Cornering support: 31 mm IW stabilizes sidewalls for precise tracking on off-camber, rock, and root.
High-speed stability: 25 mm depth yields controlled compliance—filters buzz without going vague.
Easy upkeep: DT350 Ratchet internals are simple to clean and re-grease mid-season.
Product Features
- Wide, flat bead load path → larger contact area for better impact diffusion and pinch protection; holds up when things get rough.
- DH-specific layup with targeted reinforcements at the bead and spoke bed for repeated drops and high-frequency impacts.
- 31 mm inner width supports 2.4–2.6″ DH tires, staying composed at lower pressures.
- 25 mm depth balances lateral support with vertical compliance to filter chatter and reduce arm fatigue.
- DT350 EDG: classic Ratchet mechanism—reliable, strong, and easily serviceable—with a limited-edition finish.
- Tubeless-friendly interior: rounded edges and a smooth tire bed make setup quick and long-term sealing stable.
Ride Performance
- Impact resilience: Wide flat bead + reinforced layup shrug off square-edge hits and harsh landings.
- Cornering support: 31 mm IW stabilizes sidewalls for precise tracking on off-camber, rock, and root.
- High-speed stability: 25 mm depth yields controlled compliance—filters buzz without going vague.
- Easy upkeep: DT350 Ratchet internals are simple to clean and re-grease mid-season.
| Brand | ICANIAN – DH40 |
|---|---|
| Type | Enduro/DH |
| Model | DH40 |
| Material | 100% Carbon Fiber Toray T700 & T800 |
| Size | 29ER |
| Depth | 25mm |
| Width | Inner 31mm,Outer 40mm |
| Profile | Hookless with widened, flat-top bead |
| Intended Use | Enduro bike /All mountain bike |
| Hole | 32H/32H |
| Spokes | Sapim leader |
| Weight | front 970±15g, rear 1005g±15g |
| Hub | DT Swiss 350 EDG Limited Edition |
| Freehub | HG / XD / Micro Spline (choose one) |
| Weave | UD matte |
| Front axle sizes | 110×15, 110×20 |
| Rear axle sizes | 148×12, 157×12 |
| Recommend tire width | Tubeless-Ready 2.3–2.8″ (compatible with mainstream foam inserts) |
| Max cyclist weight | 120kg |
| Rim weight | Standard 520 ± 15 g (per rim) |
| Warranty | 2 Years |
| Test | EN test |
Warranty Policy
Each ICANIAN frame and rim has a valid product lifecycle. Each bicycle, frame and rim has a unique identification number and warranty card. Please fill in the provided card and warranty form and send it to us. Failure to use the provided warranty card will void your warranty. Please keep the dated receipt as proof of purchase.
Product Group:
Frames and Rims
Applicable to all ICANIAN brand bicycle frames and rims.
Coverage:
2 years warranty from the date of purchase.
Condition:
If any manufacturing defect occurs within 30 days from the date of purchase, ICANIAN is obliged to replace the rim and pay for shipping. If any manufacturing defect occurs after 31 days and up to 2 years from the date of purchase, ICANIAN is obliged to replace the product. The product owner is responsible for shipping costs.
If we no longer produce the rim you purchased, we will upgrade you to the latest equivalent model free of charge.
The warranty plan is non-transferable and applies to the original purchaser only.
This warranty does not cover:
Normal wear and tear (bearings, spokes, nipples, brake rims, tires, inner tubes, pawls, flywheels, seals, rim tape, etc.)
Improperly installed and/or adjusted products.
Problems caused by neglect or poor maintenance.
Surface treatment and cosmetic treatments (anodizing, decals, etc.)
Impact damage.
Consequential or incidental damages (if applicable)
Products purchased “second-hand”, “used”, “as is” or clearly marked “no warranty”
Counterfeit products
Unauthorized modifications or changes, including but not limited to any repairs performed by anyone other than ICAN or ICANIAN authorized service providers, or any repairs other than those recommended by ICANIAN customer service.
Warm reminder: If you find any quality problems with the product, please contact ICANIAN official customer service as soon as possible. Do not repair it privately, otherwise we will not assume any warranty responsibility.
The following will void your warranty
Abuse (stunt riding, etc.)
Wheel modification
Tire pressure exceeding 50psi
Improper assembly
Installation of parts or accessories not originally intended for or compatible with the wheelset sold.
Using brake pads not designed for carbon fiber wheels.
There are no reviews yet. Be the first one to write one.
